Programmable auxiliary functions – Kenwood TK-8150 User Manual
Page 11
7
PROGRAMMABLE AUXILIARY FUNCTIONS
Keys y to !1 {pages 4 and 5} can be programmed with the auxiliary functions
listed below. The keys can only be programmed with functions, depending on
whether you are using a Conventional Group or a Trunking System. Please
contact your dealer for further details on these functions.
• Auto Telephone
• AUX A
• AUX B
• Channel/GID* Down
• Channel/GID Recall
• Channel/GID Up
• Direct CH**/GID 1
• Direct CH/GID 2
• Direct CH/GID 3
• Direct CH/GID 4
• Direct CH/GID 5
• Display Character
• Emergency Call
1
• Home Channel/GID
• Horn Alert
• LCD Backlight
• Message Mode
2
• Monitor
• None
• Operator Selectable Tone
3
• Public Address
• Scan
• Scan Del/Add
• Scrambler
4
• Send GPS
5
• Speaker Internal/External
• Squelch Level
3
• Talk Around
• TEL Disconnect
• 2-Tone Encode
3
• Zone Down
• Zone Up
1
This function can be programmed only on keys
y
to
!1
(
PF1
to
PF6
).
2
This function can be programmed only on keys
u, i
and
!1
(
PF2
,
PF3
and
PF6
).
3
These functions can be used only in Conventional Groups.
4
This function can be selected only when the Scrambler board has been installed.
5
This function can be selected only when an external GPS receiver has been installed.
* GID = Group ID
** CH = Channel
The selector can be programmed with the following three functions. Please
contact your dealer for further details on these functions.
• Channel/GID Up/Down
• None
• Zone Up/Down