Search for channels – Kathrein UFC 762si User Manual

Page 31

AUTOMATIC SEARCH

SEARCH FOR CHANNELS

The frequencies and
symbol rates, and the
channels available,
may be different for

different cable network operators.
So as to keep the search time as
short as possible, you can ask
your cable network provider in
advance for information on which
programmes are transmitted on
which frequencies and channels
and with which symbol rates,
and then set up the search
accordingly.

Use the

buttons to select the start frequency for the search.

Press the

buttons to access the next line.

Use the

buttons to select the end frequency for the search.

Press the

buttons to access the next line. If necessary you can input further symbol rates at this point,

using the numeric pad buttons on the remote control.

Press the

buttons to access the next line. Use the

buttons to perform the settings for the

channels to search for. You can select from “All”, “Only encrypted” and “Only free to air”.

Press the

buttons to access the next line. Press the

button to start scanning for channels.

This manual is related to the following products:

UFC 762sw