Kambrook Stick Mix KSB7 - Manual (Page 12)

11
Stick Mixer
Before cleaning, turn the power off
at the power outlet and then remove
the plug. Remove the motor body
from the stainless steel Blending Shaft.
The stainless steel Blending Shaft
should be hand washed in hot soapy
water, rinsed and dried thoroughly
after each use.
Do not use abrasive cleaners or
steel wool.
QUICK WASH: Between each
processing task, with the motor body
attached and turned on at the
power outlet, place the stainless steel
Blending Shaft and blade assembly
only in to a jug of water and press the
‘ON’ button for 5 seconds. This will
remove any food on the blade and
shaft and allow you to continue onto
the next processing task.
Chopping Bowl
Before cleaning, turn the power off at
the power outlet and then remove the
plug. Remove the motor body from the
chopping bowl lid, and then remove
the lid and chopping blade from the
chopping bowl. The chopping bowl,
chopping bowl lid and chopping
blade should be hand washed in
hot soapy water, rinsed and dried
thoroughly after each use. Do not use
abrasive cleaners or steel wool.
Motor body
To remove any food residue wipe
the motor body and cord with a
damp cloth only. Do not use abrasive
cleaners or steel wool.
Never immerse the motor body in
water or any other liquid.
NOTE: The detachable blender
shaft is dishwasher safe.
Do not wash any other parts of
the Stick Mixer in the dishwasher.
Blades are extremely sharp,
handle with care.
Storage
Before storage, turn the power off at
the power outlet and then remove
the plug. Ensure the appliance is
clean and completely dry.
Attach the Blending Shaft to the
motor body. Store upright on the
bench or in a convenient cupboard.
Place the chopping blade into
the chopping bowl and insert the
chopping bowl lid. Store upright on the
bench or in a convenient cupboard.
Care, Cleaning and Storage