Kambrook Stick Mix KSB7 - Manual (Page 11)

10
Operating Your Kambrook Essentials
Stick Mix
continued
NOTE: Always place blade in
bowl before adding the food to
be chopped.
Place the lid onto the chopper bowl.
The lid should sit into the designated
keys on the sides of the bowl.
Align the mark on the motor unit
with the mark chopper bowl.
Screw the motor unit into the chopper
lid by turning the motor unit in a
clockwise direction until the mark
on the motor unit is aligned with the
mark on the chopper lid (Fig 5).
Fig. 5
Using The Chopper Bowl
Plug into a 230V or 240V power outlet
and switch on at the power outlet.
Depress the desired speed control
switch on the motor unit to
commence processing. The Stick
Mix motor will only operate while
the speed control switch remains
depressed – this is a safety feature.
When you have finished processing
the food, switch off at the power
outlet and remove plug.
Before removing processed food from
the chopper bowl, remove the blade.
Recommendations For The
Chopper Bowl
Do not operate your Stick Mix
chopper when the bowl is empty.
When processing, cut food into
uniform sizes, this will ensure quicker,
consistent results.
For effective processing depress the
speed control switch a few times in
succession, using a ‘pulse’ action.
During processing hold the motor
body with one hand and the chopper
attachment with the other.
Hard food stuffs such as coffee beans,
ice cubes, cereals, large whole spices
and chocolate in lumps should not
be processed with this appliance, as
these may damage the blades.