Kodak V2CS - Manual (Page 4)

4 KODAK VISION2 Color Negative Control Strips, Technical Data and Crossover Information
Control Strip Log Exposure Range
The graphs in Figure 2 and Figure 3 demonstrate the
differences between the former ECN control strip exposed
on KODAK VISION 200T Color Negative Film 5274, and
the new format exposed on KODAK VISION2 200T Color
Negative Film 5217.
Physically, the center-to-center step distance has been
maintained on the new control strips; no problems should be
encountered with existing automatic densitometers.
Once the transition to the new control strips is complete,
and the new control step reference values have been
determined, continue to use KODAK VISION2 Color
Negative Control Strips in the same manner as your previous
control strips.
Please contact your Kodak representative for additional
information on monitoring your process with control strips.