Kenwood DPX-4020 - Manual (Page 35)

— 35 —
Installation ■
Installation
When performing a check of the CD operation prior to installation,
place this unit in a hirizontal position and perform a loading/eject
of the CD.
2CAUTION
Install onto the car bracket using the supplied screws (M5 × 6
mm, M5 × 7 mm). The holes of the car bracket to use will differ
depending on the car model.
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
DPX-4020 : Accessory2
DPX-5050/5030 : Commercially available
(M4
× 8 mm)
Accessory1
(M5
× 6 mm)
or Accessory4
(M5
× 7 mm)
Accessory3
(Only for NISSAN car)
DPX-5050_M_r1_U.S 03.1.21 0:02 PM Page 35