Printing from a memory card, Using default settings to print a picture – Kodak HERO 3.1 User Manual
Page 37
www.kodak.com/go/aiosupport
31
KODAK HERO 3.1 All-in-One Printer
Printing from a memory card
You can print pictures from the following cards:
The memory card slot on your printer accepts the following memory cards:
• SD Card
• SDHC Card
• MMC Card
• MEMORY STICK
• Variations of the memory cards listed above that require an adapter (for
example, MEMORY STICK Duo, miniSD, and microSD)
IMPORTANT:
If you use a memory card with an adapter, make sure you insert and remove
the adapter and the memory card as a unit; do not remove the memory card
while leaving the adapter in the printer.
Using default settings to print a picture
1. Load photo paper (
short side first
) into the center of the paper input tray with
the
glossy side toward you
(see
), and move the
paper-edge guides until they touch the paper.
IMPORTANT:
Always load the paper
short side first. The printer automatically detects
the orientation of the picture, whether it’s portrait or landscape, and prints
accordingly. If the photo paper is loaded in the wrong direction, the image
will be cut off and the paper may jam. If the paper is loaded with the wrong
side up, the image quality will be affected.