Konica Minolta S304 - Manual (Page 104)

104
DATA-TRANSFER MODE
CHANGING THE COMPACTFLASH CARD (DATA-TRANSFER MODE)
Care should be taken when changing CompactFlash cards while the camera is attached to the com-
puter. Data could be lost or damaged if the camera is not properly disconnected.
WINDOWS 98 AND 98SE
1. Turn off the camera.
2. Change the CompactFlash card.
3. Turn the mode dial to the data-transfer position to remake the USB connection.
WINDOWS ME AND 2000 PROFESSIONAL
MACINTOSH
Always confirm the access lamp is out
before removing the CompactFlash card.
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 102).
2. Turn off the camera.
3. Change the CompactFlash card.
4. Turn the mode dial to the data-transfer position to remake the USB connection.
1. Stop the USB connection by dragging the drive icon into the trash (p. 103).
2. Turn off the camera.
3. Change the CompactFlash card.
4. Turn the mode dial to the data-transfer position to remake the USB connection.