Kenwood KDC-MP443U - Manual (Page 6)

6 | KDC-MP5043U/ KDC-MP543U/ KDC-MP443U
*Factory setting
*
1 Function of KDC-MP5043U/ MP543U
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Item Setting Entry Setting overview Condition Page
“CODE SET”/
“CODE CLR” 1 sec. Sets/Resets security code. 10, 11
“SKIP”* 1 “0.5%”*/ “1%”/
“5%”/ “10%” Sets the ratio of skip performed with . 8
“DIM” “OFF”*/ “ON” Adjusts the brightness of the display according to the surrounding
illumination. —
“ICON” “OFF”/ “ON1”/
“ON2”* Sets the Graphics mode of the display. 15
“SWPRE” “R”*/ “SW” Sets the preout output. 15
“SPRM” “OFF”/ “ON”* Turns ON/OFF the Supreme function. 15
“AUTO1”/ “AUTO2”/
“MANUAL” “AUTO1”*/ “AUTO2”/
“MANUAL” Selects the tuning mode of the radio. 15
“CRSC” “OFF”/ “ON”* Switches to Monaural to decrease noise when reception is poor.
“NAME SET” 1 sec. Sets the display when switched to AUX source. 7
“SCL” “AUTO”*/ “MANU” Specifies whether the text is scrolled automatically. —
“AUX” “OFF”/ “ON1”*/
“ON2” Sets whether to display AUX during source selection. 15
“CD READ” “1”*/ “2” Sets the CD read mode. 15
“DEMO” “OFF”/ “ON”* 2 sec. Specifies whether to enable demonstration. — 11
Menu System
Set up the following functions.
1 Enter menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Press the [FM+] or [AM–] button.
3 Set the menu item
Press the [ 4] or [¢] button.
4 Exit menu mode
Press the Search button.