Kenwood KDC-MP443U - Manual (Page 11)

English | 11
Deactivating Security Code
To deactivate the Security Code function.
1 Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
3 Select Security Code mode
Press the [FM+] or [AM–] button.
Select the “CODE CLR” display.
4 Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE CLR” is also
displayed.
5 Enter Security Code
Operation type Operation
Select the digits to enter Press the [ 4] or [¢] button.
Select the Security Code
numbers Press the [FM+] or [AM–] button.
6 Press the [AUD] knob for at least 3 seconds.
“CLEAR” is displayed.
The Security Code function deactivates.
7 Exit Security Code mode
Press the Search button.
⁄
• If a wrong security code is entered, “ERROR” is displayed.
Enter a correct security code.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1 Turn the power ON.
2 Do the step 5 through 6 operation, and enter
the Security Code.
“APPROVED” is displayed.
Now, you can use the unit.
Demonstration mode setting
Setting the demonstration mode as follows;
Display Setting
“DEMO ON” The Demonstration mode function is ON.
“DEMO OFF” Exit Demonstration mode (Normal mode).
1 Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
2 Select Demonstration mode
Press the [FM+] or [AM–] button.
Select the “DEMO” display.
3 Set the Demonstration mode
Press the [AUD] knob for at least 2 seconds.
4 Exit Demonstration mode
Press the Search button.