Application control, Language selection (osd), Common interface – Kathrein UFD 510 User Manual
Page 38: Initial settings

Initial settings
38
PROGRAMME
The programme slot is entered in this column using the numeric keys
to
and
the
keys are used to select the type of programme.
TV
TV programme
RADIO
Radio programme
NO
No programme
If a timer event is being processed, all the remote control handset keys are barred
except the Standby key. After processing a timer event the receiver switches into
standby.
Application control
The EPG and the applications in general can be closed down.
The screen display shows which application programmes are switched on.
The settings have the following meaning:
SURFER
ON
The on-screen programme information is switched on.
OFF
The on-screen programme information is switched off.
EPG
ON
The programme information called up via the colour keys
is switched on.
OFF
The programme information called up via the colour keys
is switched off.
ALL
ON
All applications are switched on.
OFF
All applications are switched off.
These settings are valid only for bouquets.
All positions of application control are set to ON.
Language selection (OSD)
The language for the OSD (on-screen display) is selected with this menu entry.
Use the
keys to select the language and confirm this selection with the
key.
Common interface
The contents of this menu entry is dependent on the code card for Pay-TV which is
inserted into the PCMCIA slot (view of front panel, item 6).