beautypg.com

Selecting a tv or radio programme, Electronic programme guide and applications – Kathrein UFD 510 User Manual

Page 12

background image

Electronic programme guide and applications

12

This starting page can be selected from all levels of the submenus by pressing the

key. With the

key, one is taken to the TV programme or, via the selection

page, to the corresponding menu entry.

The menu selection is displayed on the right-hand side of the screen. It contains
the following entries:

Bouquet selection

The Bouquets (compilations of programmes) are displayed on the left-hand side of
the screen. The Bouquets shown in the illustration are for example only, and the
Bouquets that appear on your screen may be different.

TV programmes

A list of all the TV programmes which can be received is displayed on the left-hand
side of the screen. You can alter the order of the programmes in this list as desired
(see “Initial settings“, “Programme organisation“).

Radio programmes

Digital radio programmes can be received via satellite with your receiver. Factory
pre-programming for a multitude of programmes is already done. If you connect the
Cinch inputs of your stereo system to the Cinch outputs (2) on the rear of your
receiver, you will be able to listen to radio programmes with greater fidelity. You
can turn off your TV set.

A list of all the radio programmes which can be received is displayed on the left-
hand side of the screen. You can alter the order of the programmes in this list as
desired (see “Initial settings“, “Programme organisation“)

Installation

With this menu entry you can make settings and carry out checks on the receiver
(see “Initial settings“).

Selecting a TV or radio programme

To select a TV or radio programme proceed as follows::

Using

the

keys move step-by-step to the menu entry

“TV programmes“ or “Radio programmes“.

With

the key or the

key, select the left side of the Navigator.

Move step-by-step to the desired programme using the

keys.

Confirm your selection with the

.

To select a programme you can also use the

keys.

Both keys have two different functions:

The key

key

-

scrolls up a page if you are located in programme selection.

-

increments the programme number by one if you have selected a programme.