beautypg.com

Diseqc menu, Initial settings – Kathrein UFD 510 User Manual

Page 34

background image

Initial settings

34

DiSEqC MENU

The settings for the DiSEqC signal are displayed on the screen:

The settings have the following meaning:

22 KHz

Settings:

High/Low

Switchover from low band to high band on LNB.

Pos A/B

Switchover between two satellite positions.

OFF

No 22kHz-controlled LNB is present in the system .

The default setting is “High/Low“.

Tone burst

Settings:

OFF

The tone burst signal is switched off.

Pos A/B

Switchover between two satellite positions.

Opt. A/B

Optional selection

High/Low

Switchover from low band to high band on LNB.

The default setting is “OFF“.

DiSEqC

Settings:

ON

The DiSEqC signal is switched on.

OFF

The DiSEqC signal is switched off.

The default setting is “ON“.

DiSEqC repeat

Settings:

OFF

The DiSEqC repeat is switched off.

1

The DiSEqC signal is repeated once.

2

The DiSEqC signal is repeated twice.

The default setting is “OFF“.

UFO mini

Settings:

OFF

No subscriber-controlled preprocessing system is present.

ON

A subscriber-controlled preprocessing system is present.

The default setting is “OFF“.

Remote frequency

Intermediate frequency of subscriber-controlled preprocessing system.

Settings in the DiSEqC menu should be carried out only by trained specialists.
Incorrect settings can result in loss of the satellite signals (reception no longer
possible).