Kathrein UFD 510 - Manual (Page 35)

Initial settings
35
TV TYPE
The settings for the TV set are displayed on the screen:
The settings have the following meaning:
Screen format The screen format for the TV set is determined by this setting.
4:3 The aspect ratio of the screen is 4:3.
16:9 The aspect ratio of the screen is 16:9.
The default setting is “4:3“.
TV standard The TV standard is determined by this setting.
PAL The PAL standard is permanently set.
Video output The signal at the video output is adjusted with this setting.
RGB The RGB signal appears at the video output.
SUPER The S-VHS signal appears at the video output.
Select only the video output signal which your TV set is capable of processing.
TIME
The settings for the time are displayed on the screen.
The settings have the following meaning:
Local time Local time is displayed. The satellite is used as timing element.
Time zone The time zone is shown in relation to GMT (Greenwich Mean Time).
GMT+1 = MEZ (Central European Time). During summer time set to GMT+2.
An incorrectly set time also affects the timer.
If you have selected the menu line “Local time“, the key can be used to
advance the time by one hour. With this the time zone is also increased. With the
key the local time is retarded by one hour and the time zone is decreased.
The time zones can be adjusted in the “Time zone“ menu line using the
keys, which also results in simultaneous correct setting of the local time.
SOFTWARE UPDATE
The UFD 510 digital receiver comes supplied with the optimum system software.
Over the course of time, it may become necessary to adapt the software to
changed conditions.
This ensures that your digital receiver is always kept right up-to-date. The internal
settings (e.g. TV and radio lists) are not altered as a result.