Kenwood KDC-37MR - Manual (Page 29)

— 29 —
Installation
Accessory7
Screwing the Faceplate on the Unit
■
Never insert the taptite screw (ш4 Ч 16 mm) in any other screw
hole than the one specified. If you screw it in another hole, it
will contact and may cause damage to the mechanical parts
inside the unit.
2CAUTION
If you want to fasten the faceplate to the main unit so that it
does not fall off, screw in the provided screw (ш4
Ч 16 mm) in
the hole shown below.
Function of the KDC-416S/ 316S/ 316V/ 216S
KDC-416S(K)_U.S_ver2.0 00.12.26 0:58 PM Page 29