Kenwood KDC-37MR - Manual (Page 17)

Function of the KDC-416S/KDC-316S/KDC-37MR/KDC-316V
Search forward or backward through the discs in a disc
changer.
Making a Reverse Disc Search:
Press the AM button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
Press the FM button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.
"LOAD/LOAd" is displayed when discs are being exchanged on
the disc changer.
NOTE
Disc Search ( Function of disc changers)
Play starts at the beginning of the displayed track number.
(For disc changers : KDC-416S/316S/37MR/316V only)
Pressing the 4 button while listening to track 1 will only search
back to the beginning of that track. The reverse search is not
"recycled" to the last track on the disc.
Making a Forward Track Search:
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
Play starts at the beginning of the displayed track number.
(For disc changers : KDC-416S/316S/37MR/316V only)
You cannot make a forward track search when listening to the
last track on a disc.
NOTE
NOTE
Search forward or backward through the tracks on the disc
until you reach the one that you want to listen to.
Making a Reverse Track Search:
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current
track, twice to search back to the beginning of the previous
track, and so forth.
Track Search
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
canceled when it reaches the beginning of a track, at which point
normal play will automatically resume.
NOTE
Fast Forwarding and Reversing Disc Play
• You can give names to discs through the presetting disc name
function (page 19).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "NO TEXT" is
displayed for CD and "NO TITLE/NO NAME" is displayed for
MD.
• Depending on the type of characters of the CD text, some
characters may not be displayed.
NOTE
— 17 —
KDC-416S(K)_U.S_ver2.0 00.12.26 0:58 PM Page 17