Kyocera KM-C1530 - Manual (Page 94)

5 Basic Operations
5-6 KM-C1530
To copy a document
1 Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2 Turn the paper type dial on the 1st
drawer to the setting for the type of
paper loaded. (Refer to page 3-7 for
more details.)
3 Select the desired color mode. (Refer to page 2-20 for more details.)
4 Make sure that the Basic screen is
displayed, and then touch [Paper].
A screen that allows you to select
the paper source appears.
5 Select the 1st drawer. (In the
example screen shown at the right,
overhead projector transparencies
have been loaded into the 1st
drawer.)
6 Specify any other necessary settings.
❍ Zoom (Refer to page 5-14 for more details.)
❍ Original Image Type (Refer to page 5-18 for more details.)
❍ Density (Refer to page 5-20 for more details.)
7 Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.