Kodak DX7590 - Manual (Page 63)

Troubleshooting
www.kodak.com/go/support 55
Flash does not fire ■ Open the flash unit ( page 20 ).
■ Check the flash setting and change as needed ( page 20 ).
Storage location is
almost or entirely full ■ Transfer pictures to the computer ( page 51 ).
■ Delete pictures from the card or insert a new one ( page 7 ).
■ Change image storage location to internal memory
(
page 29 ).
Battery life is short ■ Wipe the contacts with a clean, dry cloth ( page 64 ) before
inserting a battery in the camera.
■ Insert a charged battery ( page 2 ).
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress shutter button all the way ( page 8 ).
■ Insert a charged battery ( page 2 ).
■ Wait until the AF/AE indicator turns green before attempting
to take another picture.
■ Memory full. Transfer pictures to the computer ( page 51 ),
delete pictures from the camera ( page 39 ) or card, change
image storage location, or insert a new card.
Error message
appears on EVF/LCD
screen ■ Turn the camera off.
■ Remove memory card from the camera.
■ Remove the battery and wipe the contacts with a clean, dry
cloth (
page 64 ).
■ Reinstall the battery.
■ Turn on the camera.
■ If all else fails, get customer support help (see page 60 ).
Memory card not
recognized or camera
freezes with card. ■ Card may be corrupted. Format card in camera (see page 7 ).
■ Use another memory card.
If... Try one or more of the following