KTI Networks 10BASE-T - Manual (Page 7)

Features
• Complies with IEEE 802.3 and IEEE 802.3u standard for
Ethernet/Class II Fast Ethernet repeater
• Provides a configuration switch (10M/100M/AUTO) to set all
8 TP ports as 10BASE-T ports, 100BASE-TX ports or 10/100
auto-sensing ports.
• In AUTO mode, each TP port can support either an Ethernet
10Mbps connection or a Fast Ethernet 100Mbps connection
with auto-sensing the connection speed.
• The hub provides one uplink jack that allows easy linking of
two hubs via straight-through UTP cable.
• The TP ports are implemented with auto partition and
reconnecting function to protect the network from failure
caused by consecutive collisions from a specific port.
• The jabber function is implemented to prevent reception of
illegally long packet, which would degrade network perfor-
mance.
• Compact design suitable for small workgroup
• Specifications
Power: +12V 1000mA min.
Dimension: 194 mm x 116 mm x 20 mm (WxDxH)
Temperature: 0
o
to 40
o
C when operating
Humidity: 10% to 90% non-condensing when operating
2