Kenwood KRC-6901R - Manual (Page 6)

MENU button to enter the menu mode and then display the
function to make the setting. Details on each setting are
explained separately in the corresponding function page.
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the
¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the
4 button to search through the functions
backward.
Example: If you want to switch the tuning mode from Auto1 to
manual, first search through the functions until you
see "Auto 1" in the display.
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The tuning mode will switch from Auto 1 to Auto 2.
Pressing the button again switches the setting to
manual, and "Manual" is displayed.
Ending the menu mode
Press the MENU button.
The selection includes:
Touch Sensor Tone (Beep ON / OFF)
➞ Time Adjustment* 1
(CLK ADJ* 2 ) ➞ Automatic Time Adjustment (SYNC
ON / OFF) ➞ Disabled System Indicator (DSI ON / OFF) ➞
Selectable Illumination (COL GRN / AMB) ➞ Contrast
Adjustment (CONT ##) ➞ Dimmer (DIM ON / OFF) ➞ Switching
Graphic Display(GRAP ON / OFF) ➞ News Bulletin Function
(NEWS OFF / ##M) ➞ Local seek* 4 (LO.S OFF / ON) ➞
Selecting Tuning Mode* 4 (Auto1 / Auto2 / Manual) ➞ Auto
4
Auto 2 Manual
3
2
1
To accommodate a greater number of functions, a menu
system has been employed for making settings. Press the
Menu System
This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.
Loudness
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning down the volume all the way turns off the attenuator
function.
NOTE
Attenuator
Increasing Volume:
Press the u button to turn up the volume.
Decreasing Volume:
Press the d button to turn down the volume.
Volume
Basic operations
— 6 —
English
KRC-6901R_U.K 2003.10.06 08:13 AM Page 6