Kenwood KRC-6901R User Manual

Page 13

Each time you press the FM or AM button until the desired
setting is displayed.
Press the FM button to increase the interval, and the AM
button to decrease it.

OFF

↔ 00M ↔ 10M ↔ 20M ↔ 30M ↔ 40M ↔ 50M ↔ 60M

↔ 70M ↔ 80M ↔ 90M

(M= minutes)

When you select the news interruption timeout interval, the
News function turns on and the NEWS indicator lights up.
When a news bulletin is received, "NEWS" will be displayed and
reception will begin at the preset volume.

If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.

Press the MENU button to end the menu mode.

• This function is only available if the desired station sends PTY-

code for news bulletin or belongs to Network>-Network sending PTY-code for news bulletin.

• If you turn on the news bulletin function in the MW/LW band,

the band is switched automatically to the FM band.
However, the MW/LW band is not returned to when you turn off
the function.

NOTE

You can arrange to have news bulletins interrupt your current
listening source, including other radio stations. When the News
Bulletin function is on, the PTY News Timeout setting allows
you to set the interval during which further news interruption
cannot take place. You can adjust the PTY news interruption
period from 10 to 90 minutes for each journey.

Turning News Bulletin Function On/Off:

Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.

Press the

¢ button repeatedly until the News Bulletin

function appears in the display.
Press the

4 button to search in the other direction.

The function setting is indicated by "NEWS OFF" or "NEWS
##M" in the display, indicating that the function is on or off,
respectively.

Depending on the interval chosen, the "##M" in the display will
change when the function is turned on.

Changing the Function Setting
Press either the FM or AM button.

NOTE

News Bulletin Function
with PTY News Timeout Setting

function appears in the display.
Press the

4 button to search in the other direction.

The function setting is indicated by "ATPS ON" or "ATPS OFF" in
the display, indicating that the function is on or off,
respectively.

Switching settings
Press either the AM button or FM button.
The display and setting will change.
If the traffic information station you are tuned to experiences
poor reception, this function automatically seeks another TP
station.

Press the MENU button to end the menu mode.

— 13 —

KRC-6901R_U.K 2003.10.06 08:13 AM Page 13