Kenwood KRC-6901R - Manual (Page 24)

This function permits the text to be scrolled and the entire text to
be displayed. Switching between manual scrolling and automatic
scrolling is permitted. The factory default is manual scrolling.
To scroll manually:
Press the DISP button to display the disc title or the track title.
Holding down the DISP button for one second or more results
in one scrolling display of the titles.
Manual/Automatic scroll switching:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly to switch the function to be
set to the text scroll function.
Pressing the
4 button results in the functions being switched
in the reverse order.
The text scroll function is displayed with "SCL Manu" or
"SCL Auto".
"SCL Manu" (Manual scrolling)
"SCL Auto" (Automatic scrolling)
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
To scroll automatically:
Press the DISP button to display the disc title or the track title.
The titles will be displayed in one scrolling display.
When the disc or track to be played changes, the title is displayed
in one scrolling display.
Holding down the DISP button for one second or more results
in one scrolling display of the titles.
Only units with a CD text feature permit title display.
NOTE
2
NOTE
1
4
3
2
1
2
1
Text Scroll
External disc control features
— 24 —
English
If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote control.
"DNPP" will appear in the display, and the disc name preset play
mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset will display "NO NAME".
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name.
Also note that "NO DISC" will be displayed when a disc has not
been loaded.
Rapid display (forward / reverse):
Press the DISC + or DISC – button.
Pressing the DISC
+
button will rapidly display the preset
names/disc titles in order.
Pressing the DISC
– button will rapidly display the preset
names/disc titles in reverse order.
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
2
NOTE
1
Disc Name Preset Play (DNPP)
(Function of remote control with DNPP button)
KRC-6901R_U.K 2003.10.06 08:13 AM Page 24