Konica Minolta DiMAGE Xi - Manual (Page 83)

83
Confirm the indicator lamp is not lit and then drag the mass-storage device icon and drop it into the
trash.
Disconnect the USB cable and turn off the camera.
• If the USB cable is disconnected before performing the first step, an alert message will appear.
Always complete the first step before disconnecting the USB cable.
Macintosh
The hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then click
“Stop.”
A confirmation screen will appear to indi-
cate the devices to be stopped. Clicking
“OK” will stop the device.
A third and final screen will appear to
indicate the camera can be safely discon-
nected from the computer; click OK. Turn
the mode dial to another position and
then disconnect the USB cable.