Konica Minolta DiMAGE Xi - Manual (Page 50)

50
R
ECORDING MODE
Spot AF
The spot AF is used for selective focusing. Both focus and exposure are determined with the spot
focus area.
Press and hold the enter button (1) to switch
between the wide focus frame and the spot
focus area. Place the subject inside the spot
focus area (2) and pressing the shutter-release
button partway down to lock the focus and the
exposure. Focus lock (p.24) is active for off-
center compositions. The focus signals (p.25)
will confirm the image is in focus. Press the
shutter release button all the way down to take
the picture (3).
When the LCD monitor is off, the AF system
cannot be switched between wide and spot AF;
the last AF mode set will be active. When the
monitor display is live image only, switching
between the wide and spot AF modes resets
the display mode to full.
1
2
3