Konica Minolta DiMAGE Xi - Manual (Page 82)

82
D
ATA
-
TRANSFER MODE
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Turn off the camera
and then disconnect the USB cable.
Disconnecting the camera from a computer
Windows Me, 2000 professional, and XP
Confirm the indicator lamp is not lit. Turn
off the camera and then disconnect the
USB cable.
To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
Windows 98 and 98SE
Never remove the USB
cable while the viewfinder
indicator lamp is lit!