Kenwood KXF-W6010 - Manual (Page 6)

CT-2050/203/KXF-W6010/W4010 (En/M)
6
Make connections as shown below. When connecting the
related system components, refer also to the instruction
manuals of the related components.
Caution: Do not plug in the power lead until all connections
are completed.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
∞
Notes Notes
Except for U.S.A., Canada
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater
than, shown below.
Left and right panels: 10 cm, rear panel: 10 cm
CD player
System control cord
System connections
To wall AC outlet
Audio cords
Audio cord
Amplifier
System control cord
*The connected component model is
variable dependent on areas.
SYSTEM
CONTROL
LINE OUTPUT
VARIABLE
R
L
R
L
CD TUNER
REC PLAY REC PLAY
MD PHONO TAPE
REC PLAY
LINEIN LINEOUT
R
L
AC110-
120V~ AC220-
240V~
SYSTEM CONTROL
SYSTEM CONTROL
L
R
SL16 XS 8
XS 8 SL 16