beautypg.com

Convenient music search (dpss), Skip play operation – Kenwood KXF-W6010 User Manual

Page 14

background image

CT-2050/203/KXF-W6010/W4010 (En/M)

14

Skip play operation

To play the tune located 4 tunes behind

Convenient music search (DPSS)

The DPSS (Direct Program Search System) enables the following convenient operations according to the instructions of the
operation keys (these operation are however not available on both decks simultaneously). The DPSS functions are based on
the detection of non-recorded spaces of 4 seconds or more between tunes.

The example below shows the case in which the direction indicated by the tape transport direction indicator is

3. If the direction

indicated by the tape direction indicator is

2, always press the keys for the opposite directions to those shown in the

illustrations below.

Tape transport direction

\.

1. Skip play

: By specifying a tune located several tunes beyond (or behind) the tune being played, skips tunes

between the current tune and the selected tune and starts playback from the beginning of the
selected tune. Up to 16 tunes can be skipped in Skip Search.

2. Rewind & Play

: Rewinds the tape to the beginning and starts playback from there.

3. Single-tune repeated

playback

: One single tune is played back repeatedly up to 16 times.

4. Dash & Play

: If a non-recorded space of more than 10 seconds is detected during playback, that space will be

skipped by fast forward tape winding.

Space (non-recorded).

Tune being played.

To play a tune located immediately after the
tune being played

To play the tune being played from the be-
ginning

To play a tune located 4 tunes beyond

Press 4 times during the playback.

Press once during the playback.

Press 5 times during the playback.

DPSS will not function properly with the following types of tapes.

÷ Tapes containing spaces of 4 seconds or more, such as conversations and speeches.

÷ Tape containing extremely low levels or non-recorded spaces in the middle of tunes, such as classical music.

÷ Tapes containing recording of large noise between tunes.

÷ Tapes containing spaces of less than 4 seconds between tunes.

÷ Tapes recorded with low recording level.

÷ Tapes recorded using Cross-fade recording.

Space (non-recorded).

Press once during the playback.

Notes

Notes

: Keys and control used in the operations described on this page.

¡

1

¡

1

¡

1

¡

1

This manual is related to the following products: