Kodak SCAN STATION 100 - Manual (Page 112)

A-61588 July 2008 7-7
Network Authentication Issues Possible Solution
Your network Domain name To find the domain name your Scan Station will use, follow these steps:
1. From a PC logged onto the same network/domain that the Scan
Station will use, right click on My Computer and select Properties.
2. From the Properties window select the Computer Name tab.
If you are on a domain, the Domain name is listed in the Domain field
(see above).
3. Copy the Domain name so you can enter into the Domain field of the
Default Credentials in the Configuration Organizer.
4. Go to the Configuration Organizer and click the Device icon and
select Default Credentials, then select Domain .
5. Enter the Domain name on the virtual keyboard and click OK.