Kyocera FS-C8008DN - Manual (Page 124)

3.10 Paper Handling
3-79
7 77 7
When the paper type to be customized is displayed, press the ENTER key. Proceed
to the next procedure.
Step 2. Selecting the Paper Weight
1 11 1
Complete Step 1. above.
2 22 2
Press the Z key.
3 33 3
Press the U or V key repeatedly until >>Paper Weight appears.
4 44 4
Press the ENTER key. A blinking question mark (?) appears.
5 55 5
Press the U or V key to display the desired paper thickness from the following:
Normal (default)
Heavy (Thick)
Extra Heavy
6 66 6
When the desired paper thickness is displayed, press the ENTER key. Proceed to the
next procedure.
Step 3. Selecting the Fuser Mode
1 11 1
Complete Step 2. above.
2 22 2
Press the V key.
3 33 3
Press the U or V key repeatedly until >>Fuser Mode appears.
4 44 4
Press the ENTER key. A blinking question mark (?) appears.
5 55 5
Press the U or V key to display the desired fuser mode from the following:
Low (default)
Middle
>>Paper Weight
Normal
>>Paper Weight
? Normal
>>Fuser Mode
Low
>>Fuser Mode
? Low