Kathrein UFD 520 - Manual (Page 40)

Installation menu
The message appears at the end of the
search.
All new programmes are added to the
existing programme list.
You can interrupt the search by pressing
the
L
button.
The search is complete
Press (OK) button
TP set-up/search
In this menu you can scan through the
transponders for specific programmes,
e.g. when new programmes are offered in
the package of a specific broadcaster.
You can obtain this information from the
respective teletext from SAT 1 or
corresponding TV and satellite magazines
as well as from the Internet. Press
O
to
open the menu.
Transponder selection
The following settings are now possible (select positions with
ou
):
- Desired satellite with
-
or
+
, the trans-
ponder frequency with numerical buttons,
- the polarisation with
-
or
+
button,
the symbol rate with the numerical buttons
and
- search mode for free-to-air or free and
- encrypted programmes with the
-
or
+
button.
The bar diagram indicates the relative
signal strength and is not an indication for
the quality of the receiving system.
Start the search by pressing
O
in the
"search" position.
The shown on-screen display appears as the result of the search.
Exit this menu by pressing
O
and go to the previously highlighted programme
(here ZDF).
Press the
L
to return again to this menu to continue searching for further trans-
ponders.
40