Kathrein UFD 520 - Manual (Page 29)

Adding/removing satellites
To enter a satellite name
You can change the satellite names in the LNB configuration menu with the num-
ber buttons. Refer to section "operating instructions" for information about the ex-
act procedure.
To remove a satellite
To remove a satellite, select the "LNB
configuration" menu, move the cursor bar
with
o
or
u
and confirm by
pressing the
-
or
+
button. You will now
be asked whether you wish to remove the
satellite. You can either confirm your
selection with
O
or cancel it with
L
.
29