Kathrein UFD 520 - Manual (Page 30)

Programme overview
Programme overview
EPG
With the
z
button, you receive an overview of the programmes
(see on-screen display) currently received from the transponder
with time and duration, provided that they are broadcast with elec-
tronic programme guide (EPG), for example, with ARD and ZDF. In
the right-hand column, the programme title is given in abbreviated
form, and the complete title appears in the last two lines. In the left-
hand column, the
ou
keys can be used to move the cursor
to a programme which should be switched to with the
O
button.
Use
L
to exit the on-screen display again.
The time scale can be altered with the
-+
buttons, so the other
course of programmes can be called up.
Use the Info button
i
to receive further information with up to 254
symbols about the currently running programme.
Full EPG
With the
z
and
F
buttons, you receive the programme over-
view of the currently received transmitter with time and duration (see
on-screen display), provided that they broadcast the electronic pro-
gramme guide (EPG).
The length of the programme list depends on each programme pro-
vider and can amount to several days.
It lasts a few seconds for the list to download.
EPG timer programming
Afterwards, you can move the coloured bar in the list with the
ou
buttons and select a programme for timer programming.
The timer is selected with the
R
button and confirmed with
O
.
The programme is recorded at the set time.
By pressing the
L
three times, you can exit this position without a
timer setting.
30