Edit tv-channellist – Kathrein DVB Cable Receiver UFC 662sw User Manual

Page 39

LOCK CHANNELS

Use the

buttons to select the channel to be blocked in the favourites list you have selected.

Press the

button to open the edit menu and use the

buttons to select the “Lock” function.

Confi rm the command by pressing the

button. You are now prompted to enter the PIN code

(factory default setting: 0000).

The channel you previously selected is now shown with a padlock to its right. In future this channel
can be viewed only by entering the four-digit PIN code.
The channel is also locked on all other channel lists. You need not additionally lock the channel in the
other channel lists.

This function can be restored again using the edit menu (select: “Unlock”).

RENAME FAVOURITES LIST

Use the

buttons to select the favourites list to be renamed. Press the

button to

open the edit menu and use the

buttons to select the “Rename favourites list” function.

Confi rm the command by pressing the

button. A keypad will now be displayed with which you

can enter the desired name alphanumerically using the numeric pad on the remote control. See also the
section “Operating Instructions”, “Alphanumeric Entries”)

START BLOCKSELECTION (HIGHLIGHTING SEVERAL CHANNELS)

Use the

buttons to select the channel starting from which you want to highlight further channels.

You can only select channels that are listed in succession in your selected favourite list. Press the

button to open the edit menu and use the

buttons to select the “Start Blockselection”

function. Confi rm with the

button. Now use the

buttons to highlight the desired channels,

starting from the previously highlighted channel and working upwards or downwards. The highlighted
channels will be highlighted in yellow and marked with a tick on the left. When you have highlighted

the channels that you wish to select, press the

button to open the edit menu once again and use

the

buttons to select the desired function (“Remove from favourites list”, or “Unlock”). Confi rm

with the

button.

The selected function can now be used in the same way as described for the respective items in this
section for a single channel.

EDIT TV-CHANNELLIST