Running a continuous slide show loop, Displaying pictures and videos on a television, Copying pictures and videos – Kodak DX7440 User Manual
Page 39
Reviewing pictures and videos
www.kodak.com/go/support
33
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, move the joystick
to highlight Loop, then
press the OK button.
2 Move the joystick
to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted. This setting remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Image quality on a television screen may
not be as good as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see
). The
slide show stops if you connect or disconnect the cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera video-out port
to the television video-in port (yellow) and audio-in port (white). See your
television user’s guide for details.
2 Review pictures and videos on the television.
Copying pictures and videos
You can copy pictures and videos from a card to internal memory or from
internal memory to a card.
Before you copy, make sure that:
■
A card is inserted in the camera.
■
The camera’s picture storage location is set to the location from which you
are copying. See