Models a, amt and ats – Kodak EKTAGRAPHIC III User Manual
Page 9
KODAK EKTAGRAPHIC III Slide Projector
5
Operation
Models A,
AMT and ATS
Open the storage compartment and remove the remote control.
Plug the 5-pin cable remote connector into the remote-control receptacle,
aligning the raised dot with the metallic rivet head.
This receptacle also accepts plugs for accessories, such as Kodak dissolve
controls.
Plug the power cord into a grounded outlet with 110- to 125-volt 60 Hz
current only.
This manual is related to the following products: