Kodak EKTAGRAPHIC III - Manual (Page 23)

KODAK EKTAGRAPHIC III Slide Projector 19
Operation
Using the Built-In Viewer
(Model ATS Only)
Important
Before opening the viewer, you must remove the projection lens from the
projector.
Removing the
Lens Turn the focus knob to the horizontal position. Push the knob toward the top
of the projector as you withdraw the lens.
Opening the
Viewer Grasp the viewer handle and pull it out from the base of the projector. It will
pop into place.
Slide the power switch to lamp to project your slides.
Closing the Viewer To close the viewer, fold it and push it back into the body of the projector.