Reading light, Standby light (modeleplusonly), Special-application receptacle – Kodak EKTAGRAPHIC III User Manual
Page 17
KODAK EKTAGRAPHIC III Slide Projector
13
Operation
Reading Light
To illuminate a small area for reading, lift the reading light cover while the
projector lamp is on.
Standby Light
(Model E Plus only)
A glowing standby light indicates a
“ready” condition.
In a dissolve program, it indicates
that
• both projectors are receiving
power
• both power switches are set at
fan
• both projection lamps are
properly installed, not burned
out, and ready
• both standby lights are operational
• all thermal fuses are functional
Special-Application
Receptacle
The special-application receptacle allows additional external control and
programming capability. It provides 22.5 V low-voltage power isolated from
the main power line.
Use this receptacle for:
•
automatic “return-to-zero” devices (models A and E Plus)
•
a low-voltage power supply
•
a dark shutter switch
The receptacle accepts 8-pin plugs and DIN-type plugs with 3 or 5 pins at
180˚. (See
“
for contact identification descriptions.)