Projecting your slides, Lens, Lamp – Kodak EKTAGRAPHIC III User Manual
Page 14
10
KODAK EKTAGRAPHIC III Slide Projector
Operation
Projecting Your Slides
Lens
To insert a lens, push the focus knob up and position the lens gear teeth on
the lens barrel with the notch on the projector.
Lamp
Slide the power switch to half lamp (for longer lamp life) or lamp (for
maximum brightness).
You may want to keep a spare KODAK EC Lamp Module (CAT 831 3587)
handy in case the lamp burns out during a presentation. Replacing the entire
module makes the change quick and easy. (See
“
” on page 21
for
instructions on changing the lamp module.) See your dealer in Kodak
products to order this module.
This manual is related to the following products: