Kawasaki 691191 User Manual

Page 9

ASSEMBLY INSTRUCTIONS

Always remove battery pack before installing or removing blade.

When removing the blade from the tool, avoid contact with skin and use
proper protective gloves when grasping the blade or accessory.

Accessories

may be hot after prolonged use.

If the blade clamp screw will not loosen enough to allow

blade installation, tap gently on the end of the wrench with a mallet until the

clamp screw breaks free.

ATTACHING / REMOVING BLADE

ATTACHING THE BLADE:
1. Remove the battery pack.
2. Retract the lower guard (see Fig. 1).
3. Slip the blade into place (see Fig. 2).
4. Put clamp washers and clamping

screw loosely in position.

5. Use the wrench to tighten the

clamping screw while pressing

down on the clamping knob

(see Fig. 3 and Fig. 4).

6. Remove wrench.
7. Replace the battery pack.

REMOVING THE BLADE:
1. Remove the battery pack.
2. Use the wrench to loosen the

clamping screw while pressing

down on the blade safety lock

button (see Fig. 3 and Fig. 4).

3. Remove the blade.
4. Tighten the blade clamp

screw back into place.

5. Remove wrench.
6. Replace the battery pack.

FIG. 1

FIG. 2

FIG. 3

FIG. 4

LOOSEN:

CLOCKWISE

TIGHTEN:

COUNTER-CLOCKWISE