Kawasaki 691191 User Manual

Page 10

OPERATING INSTRUCTIONS

Be aware that this tool is always in an operating condition

because it does not have to be plugged into an electrical outlet.

Always turn

the switch “OFF” and remove the battery pack before changing bits.

OPERATING THE TRIGGER SWITCH

Never tape the trigger switch down to provide

continuous high speed.

The tool may fail under such conditions causing fire

or personal injury.

The lock-off button helps prevent accidental starting.

This button can be pressed from either side.

THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH:
Press the lock-off button, then pull the “ON/OFF” trigger to turn the Circular Saw
“ON”

To turn the Circular Saw “OFF”, release the trigger switch. The lock-off button will

automatically reset.

ADJUSTING DEPTH AND ANGLE

ADJUST CUTTING DEPTH:
1. Remove the battery pack.
2. Hold the saw firmly and loosen the

depth adjustment knob by turning

it counter-clockwise.

3. Move the shoe to obtain the desired

depth of cut.

4. Tighten depth adjustment knob

securely by turning clockwise

before operating the saw.

ADJUST BEVEL ANGLE:
1. Remove the battery pack.
2. Loosen the bevel angle knob by

turning it counter-clockwise.

3. Adjust the angle of your cut.
4. Tighten the angle knob securely

by turning clockwise.

45º

DEPTH

ADJUSTMENT

KNOB

BEVEL

ANGLE

KNOB

LOCK-OFF BUTTON

TRIGGER SWITCH