Kenwood KRC-559R - Manual (Page 29)

— 29 —
Other features
(See page 7)
Audio Control Setting
Adjust various parameters of sound quality.
Press the AUDIO button to enter the control mode.
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
▼
Bass
▼
Treble
▼
Balance
▼
Fader
Source tone memory
Each source (tape, FM, AM, and disc changer) has its own
memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Press the AUDIO button to end the control mode.
4
3
NOTE
2
1 ¢ button 4 button
Table of Audio Control Setting
Bass
(“BAS”)
Treble
(“TRE”)
Balance
(“BAL”)
Fader
(“FAD”)
Bass decreased.
Treble decreased.
Left channel
emphasized.
Rear channel
increased.
Bass increased.
Treble increased.
Front channel
increased.
Right channel
emphasized.
Adjustment
mode
(Display)
Operation of Audio control button