Kenwood KRC-559R - Manual (Page 28)

English
— 28 —
Disc control features
(See page 7)
Function of Remote control with DNPP button (See page 8)
Direct Disc Search
Using the remote control, make direct input of the disc
number that you want to listen to.
Using the numeric buttons on the remote control, enter the
number of the disc that you want to listen to.
The selected disc number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
• Input "0" to select disc #10.
• If you enter more than two numbers all at once, a search will be
made only of the last number entered.
Press either the DISC
+
or DISC
–
button whilst the number
inputted is blinking.
The disc specified in step 1 starts playing.
Cancelling Direct Disc Search During Its Operation:
Press the 38 button.
2
NOTE
1
Function of disc changers with remote control having
number/letter entry buttons (See page 8)
Disc Name Preset Play (DNPP)
If you have preset the name of a disc that you want to listen
to in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote control.
"DNP PLAY" will appear in the display, and the disc name
preset play mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset will display "NO NAME".
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name. Also
note that "NO DISC" will be displayed when a disc has not been
loaded.
Rapid display (forward / reverse):
Press the DISC
+
or DISC
–
button.
Pressing the DISC
+
button will rapidly display the preset
names/disc titles in order.
Pressing the DISC
–
button will rapidly display the preset
names/disc titles in reverse order.
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
2
NOTE
1