KITCHENAID 2309069A - Manual (Page 7)

7
Tipping Radius
Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
■ The dolly wheel height must be added to the tipping radius
when a dolly is used.
■ If needed, the tipping radius can be reduced. See “Reduce
Tipping Radius.”
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
NOTE: Tip on side only.
Door Swing Dimensions
The location must permit both doors to open to a minimum of
90°. Allow 4
¹⁄₂" (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels or custom handles.
To adjust the door swing, see the “Adjust and Remove Doors”
section.
36 Models
42 Models
48 Models
Model Tipping Radius A
36
42
48 90
¹⁄₂" (229.9 cm)
93" (236.2 cm)
96" (243.8 cm)
A
130˚
130˚
90˚
90˚
110˚
110˚
43
¹⁄₂
"
(110 cm)
40"
(102 cm)
19
³⁄₄
"
(50 cm)
14
¹⁄₂
"
(37 cm)
36
¹⁄₁₆
"
(92 cm)
38
¹⁄₂
"
(98 cm)
130˚
130˚
90˚
90˚
110˚
110˚
47"
(119 cm)
42
⁹⁄₁₆
"
(108 cm)
23
¹⁄₄
"
(59 cm)
17
¹⁄₂
"
(44 cm)
38"
(97 cm)
41"
(104 cm)
130˚
130˚
90˚
90˚
110˚
110˚
50
¹⁄₂
"
(128 cm)
45
¹⁄₄
"
(115 cm)
26
³⁄₄
"
(68 cm)
19
³⁄₄
"
(50 cm)
40"
(102 cm)
43
¹⁄₂
"
(110 cm)