Karcher KMR 1550 B - Manual (Page 15)

35
KMR 1550 B Operating instructions for users English
Disconnecting the battery
n
Slide the seat forwards and tilt it towards the front.
n
Use an open-jawed spanner (size 10 mm) to first of all loosen the clamp
on the negative terminal ( – ) and then pull it off. Repeat the procedure for
the positive terminal ( + ).
n
Reconnect the battery by first of all attaching the clamp on the positive
terminal ( + ) and then the clamp on the negative terminal ( – ).
Opening/closing the bonnet
n
Pull the section of panelling upwards and unscrew the knob on the inside
of the bonnet.
n
Raise the bonnet towards the front until it automatically locks in position.
n Lift the rod up slightly and close the bonnet.
n
Screw the knurled knob back into the inside of the bonnet.
Tool compartment and sweeper tool kit
n There is a tool compartment under the bonnet. This compartment contains
the tools required to carry out routine maintenance tasks.
Checking tyre pressure
n
Park the sweeper on a level surface.
n
Check the tyre pressure and make any necessary corrections.
Air pressure for front and rear wheels = 8 bar.