Kenwood KDC-MPV622 - Manual (Page 25)

Function of the KDC-X569/KDC-X469
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display Setting
"AMP Mute Off" The built-in amplifier activates.
"AMP Mute On" The built-in amplifier deactivates.
Built-in Amp Mute Setting
Function of the KDC-MP522/MPV622/MPV6022/422/4022
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE N-Fad" Non-fading preout.
Switching preout
Function of the KDC-X569/KDC-X469
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display Setting
"System Q ON" The System Q factors are displayed.
"System Q OFF" The System Q factors aren't displayed.
System Q Setting
Function of the KDC-X569/MP522/MPV622/MPV6022/X469/422/4022
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display Setting
"Dimmer ON" The display dims.
"Dimmer OFF" The display doesn't dim.
Dimmer
Adjusting the display contrast.
Display and Setting
"Contrast 0"/ "CONT 0"
"Contrast 5"/ "CONT 5" (Original setting)
"Contrast 10"/ "CONT 7"
…
…
Contrast Adjustment
— 25 —
KDC-X569_U.S r2 02.10.31 10:09 AM Page 25