beautypg.com

Amp specifications – Kustom Double Cross none User Manual

Page 23

background image

22

Amp Specifications

t

All Tube 3 channel guitar amp head

6-6L6GC or EL34 power tubes using AUTOKRUISE TM biasing scheme

5-12AX7 preamp tubes & 1-12AT7 buffer tube for power amp

16, 8, or 4 Ohms @ 5% THD using 6L6s, 110W w/EL34s

Inputs

Rhythm Channel Nominal gain, Normal Input, Gain @ 5

Rhythm Channel Maximum gain, Normal Input, Gain @ 10

Rhythm Channel extra gain when Drive is activated

Gain increase at 1 kHz when Bright is activated

Lead I or II Channels Maximum gain, Normal Input, Gain @ 10

Lead I or II Channels Nominal gain, Normal Input, Gain @ 5

Broadband gain increase with only Lead Gain switch activated

Gain increase with only either Tight or Thick stage activated

Gain increase with all switches engaged

Rhythm Channel, with Volume half and Master Maximum, Boost on 10

Levels w/Boost, Send & Master @ 10 to reach full power output

Levels w/Boost & Master @ 10, but with Send @ 0 to reach full power

Tube driven, Nominal load >10k ohms

Tube driven, >100K ohm input impedance

Adjustable from 0 to +10 dB boost AFTER the Effects Loop

After power amp w/speaker emulation of 412 Straight & Slant cabs

Adjustable from 0 to +6 dBV, nominal -3 dBV

cts Rhythm, Lead I or Lead II Channel, Boost, and Effects Loop On/Off

hielded cable, and should be plugged in before turning on amp

120VAC/60Hz, 450W nominal

230VAC/50Hz, 450W nominal

240VAC/50Hz, 450W nominal

100VAC/50-60Hz, 450W nominal

304 mm (Height) x 686 mm(Width) x 276 mm(Depth), 21.3kg

12" (Height) x 27" (Width) x 10.875" (Depth), 47 lbs

t

c

Model

Double Cross

Tubes

Power Amp Tubes

Preamp Tubes

Output Power

100 W RMS

Input Impedance

1M ohms Normal or Tigh

System Gain

50 dB

All measurements taken with 1 KHz

input signal, Tone controls flat, Gain

Halfway and Volume Maximum, Boost

@ 10, Effects OFF, overall Master @

10. All Bright, Drive & cross switches

off. Measured at speaker jack at 16

ohms unless noted.

64 dB

10 dB

+3 dB

90 dB

75 dB

8 dB

5 dB

10 dB

Nominal Signal to Noise

64 dB

Effects Loop

0.15 VRMS (-16 dBV)

0.45 VRMS (-6 dBV)

Effects Send

Effects Return

Footswitchable Boost

Master Volume Boost

XLR Direct Output

Output level

Footswitch

Supplied Footswitch sele

Uses a standard stereo s

Power Requirements

USA/Canada

Europe/UK

Australia

Japan

Dimensions/Weight

mm/kg

Inches/Pounds