Kenwood KDV-Z940 - Manual (Page 46)

— 46 —
English
DVD/VCD/CD Setup Menu features
Use the procedure described below to set the output screen.
Press the each the [ 5 or ∞ ] buttons to select the
“PICTURE”.
Press the [ ENTER ] button.
Press the each the [ 5 or ∞ ] buttons to select the “TV
SCREEN”.
Press the [ ENTER ] button.
Each time you press the [ 5 or ∞ ] buttons, the mode
switches as follows:
" 4:3 LETTERBOX "
Wide-screen software with pan & scan specification is played
in a letter box screen (with black stripes on the top and
bottom).
" 4:3 PAN-SCAN " (Default setting)
Wide-screen software with pan & scan specification is played
in a panned & scanned screen (with the left and right sides cut
off).
" 16:9 WIDE "
Set the picture mode of the wide-screen monitor to “FULL”
Press the [ ENTER ] button. 4
3
2
1
Setting the Screen Mode
Setting the On Screen Display colour.
Press the each the [ 5 or ∞ ] buttons to select the
“PICTURE”.
Press the [ ENTER ] button.
Press the each the [ 5 or ∞ ] buttons to select the “COLOR
SCHEME”.
Press the [ ENTER ] button.
Each time you press the [ 5 or ∞ ] buttons, the mode
switches as follows:
" Yellow "
The colour is yellow.
" Green "
The colour is green.
" Blue " (Default setting)
The colour is blue.
" Red "
The colour is red.
Press the [ ENTER ] button. 4
3
2
1
Setting the Colour Scheme