Kenwood DNX5120 - Manual (Page 61)

English 61
t Selects a picture display time. ( "Middle")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
Panel Color Coordinate
Sets the screen and button illumination color.
1 Display the Panel Color Coordinate screen
See (page 60).
2 Select a color
1
2
3
1 Sets to the touched color.
2 Sets and registers favorite color.
3 Returns to the "System Setup 2" screen.
To register your original color
1 Start the RGB coordinate
2 Adjust the each color value
1
2
3
4
5
1 Selects a preset number to register.
2 Adjusts the Red value.
3 Adjusts the Green value.
4 Adjusts the Blue.
5 Returns to the "Panel Color Coordinate"
screen.
3 Select a Preset number to register
Adjusted color is registered to the selected
Preset button.
4 Complete the color coordination
: Press for # seconds.