Kenwood DNX5120 User Manual
Page 60
60
DNX5120/DNX512EX/DDX512/DDX5032
Setup Menu
System Setup
You can set up the system parameters.
1
Display the System Setup screen
Touch
in the "Setup
Menu" screen (page 56).
2
Setup each item
5
2
3
4
1
1 Moves to the "System Setup 2" screen.
2 Turns the key touch tone On or Off. (
"ON")
3 Allows scrolling of text display on the
Source Control screen. (
"Auto")
"Auto":
Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
4 Selects a remote control signal. (
"ON")
When turned "OFF", the remote control of
TV reception is rejected.
5 Sets a music CD playback. (
"1")
"1":
Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2":
Forcibly plays back a disc as a music
CD. Select "2" if you wish to play a
music CD having a special format or
if you cannot play a disc in the "1"
position.
⁄
• You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
• Your setup is disabled when the disc is being played.
6
7
8
9
6 Returns to the "System Setup 1" screen.
7 Moves to the "System Setup 3" screen.
8 Sets the button illumination color.
See
9 When set to "ON", the illumination color of
the screen and buttons changes one after
another.
10
13
12
11
p Returns to the "System Setup 2" screen.
q Moves to the "System Setup 4" screen.
w Sets the Preout output. (Settable only when
in Standby mode)
"Rear" :
Rear sound is output.
"Subwoofer" : Subwoofer sound is output.
e Sets the function of the [NAV] button.
"V. OFF" : Press the [NAV] button for
more than 1 second to turn the
display off.
"R-CAM" : Press the [NAV] button for more
than 1 second to switch to rear
view.
14
15
r Returns to the "System Setup 3" screen.