Kenwood KDC-MP5032 - Manual (Page 10)

10 | English
General features
System Q
Selecting the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound
setting alternates.
Sound setting Display
User memory "USER"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP40"
Jazz "JAZZ"
Flat "NATURAL"
• User memory: The values set on the
(page 10).
• Change each setting value with the
Setting> (page 11).
First, select the speaker type with the Speaker setting.
Audio Control
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Rear Volume * 1 "R-VOL" 0 — 35
Subwoofer level* 2,3 "SW L" –15 — +15
Bass level* 4 "BAS L" –8 — +8
Middle level* 4 "MID L" –8 — +8
Treble level* 4 "TRE" –8 — +8
Balance "BAL" Left 15 — Right 15
Fader* 3 "FAD" Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
• * 1 You can control this item when "2ZON" of
Setup> (page 10) is set to "ON".
• * 2 You can control this item when
Output> (page 12) is set to "SW ON".
• * 3 You can control this item when "2ZON" of
Setup> (page 10) is set to "OFF".
• * 4 Source tone memory: Puts the set up value in the
memory per source.
5 Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob, [ANG]
and [ATT] button.
Audio Setup
Setting the Sound system, such as Cross over
Network.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Setup the Audio item
Turn the [VOL] knob.